Products
Ikon Kara Bath Spout Curved Tip Matt Black
Ikon Kara Bath Spout Curved Tip Material: Brass Aerator: Neoperl Concealed Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Connection: Female 1/2 Available colours: Chrome Matt Black Brushed Nickel Brushed Gold [SHORTDESCRIPTION] Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$128.00$108.80
Ikon Kara Bath Spout Matt Black
Ikon Kara Bath Spout Material: Brass Aerator: Neoperl Concealed Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Connection: Female 1/2 Available colours: Chrome Chrome & White Matt Black [SHORTDESCRIPTION] Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$138.00$117.30
Ikon Kara Gooseneck Sink Mixer Chrome
Ikon Kara Gooseneck Sink Mixer Chrome Material: Brass Cartridge: Kerox 35mm Cartridge Aerator: Germany Neoperl Concealed Gooseneck 360 degree swivel spout Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C [SHORTDESCRIPTION] Wels Information: 4 star, 6.5L/Min WELS Reg Number: T31916 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$263.00$223.55
Ikon Kara Multifunction Shower Set Chrome
Ikon Kara Multifunction shower set 50 x 15mm brass rail ø250mm Round brass Shower Head Brass quarter turn slider Bottom diverter 1.5m Flexible PVC hose 3 Function Push Button Hand Shower Available colours: Chrome, Matt Black [SHORTDESCRIPTION] Wels Information: 3 star, 8.5L/Min WELS Reg Number: S11887 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$739.00$628.15
Ikon Kara Multifunction Shower Set Matt Black
Ikon Kara Multifunction shower set 50 x 15mm brass rail ø250mm Round brass Shower Head Brass quarter turn slider Bottom diverter 1.5m Flexible PVC hose 3 Function Push Button Hand Shower Available colours: Chrome, Matt Black <[SHORTDESCRIPTION] Wels Information: 3 star, 8.5L/Min WELS Reg Number: S11887 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$878.00$746.30
Ikon Kara Round Stainless Steel Shower Head Chrome
Ikon Kara Round Stainless Steel Shower Head Edge: Curve Panel Flat Back Material: 6mm 304 Stainless Steel Size: ø250X6mm, ø300X6mm [SHORTDESCRIPTION] Wels Information: 250mm 3 star, 8L/Min WELS Reg Number: S11287 300mm3 star, 8.5L/MinWELS Reg Number: S11289 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$84.15 - $107.95
Ikon Kara Sink Mixer Brushed Gold
Ikon Kara Sink Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Germany Neoperl Concealed High rise 360 degree swivel cast brass spout Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Chrome & White Matt Black Brushed Nickel Brushed Gold Matt Black & Rose Gold Handle [SHORTDESCRIPTION] Wels Information: 4 star, 6.5L/Min, WELS Reg Number: T26497 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$614.00$521.90
Ikon Kara Sink Mixer Brushed Nickel
Ikon Kara Sink Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Germany Neoperl Concealed High rise 360 degree swivel cast brass spout Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Chrome & White Matt Black Brushed Nickel Brushed Gold Matt Black & Rose Gold Handle [SHORTDESCRIPTION] Wels Information: 4 star, 6.5L/Min, WELS Reg Number: T26497 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$553.00$470.05
Ikon Kara Sink Mixer Chrome
Ikon Kara Sink Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Germany Neoperl Concealed High rise 360 degree swivel cast brass spout Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Chrome & White Matt Black Brushed Nickel Brushed Gold Matt Black & Rose Gold Handle [SHORTDESCRIPTION] Wels Information: 4 star, 6.5L/Min WELS Reg Number: T26497 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$425.00$361.25
Ikon Kara Sink Mixer Chrome & White
Ikon Kara Sink Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Germany Neoperl Concealed High rise 360 degree swivel cast brass spout Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Chrome & White Matt Black Brushed Nickel Brushed Gold Matt Black & Rose Gold Handle [SHORTDESCRIPTION] Wels Information: 4 star, 6.5L/Min, WELS Reg Number: T26497 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$531.00$451.35
Ikon Kara Sink Mixer Matt Black
Ikon Kara Sink Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Germany Neoperl Concealed High rise 360 degree swivel cast brass spout Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Chrome & White Matt Black Brushed Nickel Brushed Gold Matt Black & Rose Gold Handle [SHORTDESCRIPTION] Wels Information: 4 star, 6.5L/Min, WELS Reg Number: T26497 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$553.00$470.05
Ikon Kara Sink Mixer Matt Black & Rose Gold Handle
Ikon Kara Sink Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Germany Neoperl Concealed High rise 360 degree swivel cast brass spout Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Chrome & White Matt Black Brushed Nickel Brushed Gold Matt Black & Rose Gold Handle [SHORTDESCRIPTION] Wels Information: 4 star, 6.5L/Min, WELS Reg Number: T26497 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$553.00$470.05