Products
Ikon Flores Basin Mixer Brushed Gold, 2 Sizes
Solid brass construction with brushed gold finish Kerox 25mm cartridge Germany Neoperl aerator 2 Sizes Available colours: Chrome Matt Black Brushed Nickel Brushed Gold [SHORTDESCRIPTION] Wels Information: Short Mixer5 star 5L/MinWELS Reg Number: T37854 Tall Mixer5 star 5.5L/MinWELS Reg Number: T37858 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$230.35 - $377.40
Ikon Flores Bath Spout Brushed Gold
Ikon Flores Bath Spout Material: Brass Aerator: Neoperl Concealed Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Matt Black Brushed Nickel Brushed Gold [SHORTDESCRIPTION] Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$173.00$147.05
Ikon Flores Kitchen Mixer Brushed Gold
Ikon Flores Kitchen Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Germany Neoperl Concealed Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C High rise 360 degree swivel cast brass spout Available colours: Chrome Matt Black Brushed Nickel Brushed Gold [SHORTDESCRIPTION] Wels Information: 5 star, 6L/Min, WELS Reg Number: T37838 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$496.00$421.60
Ikon Flores Wall Basin Mixer Brushed Gold
Flores Wall Basin Mixer Material: Brass Cartridge: Kerox 35mm Cartridge Aerator: Neoperl Concealed Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Matt Black Brushed Nickel Brushed Gold [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T38140 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$501.00$425.85
Ikon Flores Wall Mixer Brushed Gold
Flores Shower Wall Mixer Material: Brass Cartridge: Kerox 35mm Cartridge Available colours: Chrome Matt Black Brushed Nickel Brushed Gold [SHORTDESCRIPTION] Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$168.00$142.80
Ikon Flores Wall Mixer With Diverter Brushed Gold
Flores Wall Basin Mixer with Diverter Material: Brass Cartridge: Kerox 35mm Cartridge Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Matt Black Brushed Nickel Brushed Gold [SHORTDESCRIPTION] Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$341.00$289.85
Ikon Hali Basin Mixer Brushed Gold, 2 Sizes
Solid brass construction with brushed gold finish European designed; Pin Lever Kerox 25mm cartridge Germany Neoperl Concealed aerator 2 Sizes Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold [SHORTDESCRIPTION] Wels Information: Short Mixer5 star 6L/MinWELS Reg Number: T31845 Tall Mixer5 star 6L/MinWELS Reg Number: T31846 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$192.10 - $266.90
Ikon Hali Bath Spout Curved Tip Brushed Gold
Ikon Hali Bath Spout Curved Tip Material: Brass Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold [SHORTDESCRIPTION] Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$78.00$66.30
Ikon Hali Sink Mixer Gun Brushed Gold
Ikon Hali Sink Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Germany Neoperl Concealed Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C High rise 360 degree swivel spout Pin Lever Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold [SHORTDESCRIPTION] Wels Information: 5 star, 6L/Min WELS Reg Number: T31843 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$295.00$250.75
Ikon Hali Wall Basin Mixer Curved Spout Brushed Gold
Hali Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Pin Lever; Curved Spout Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T33001 Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$385.00$327.25
Ikon Hali Wall Mixer Brushed Gold
Hali Shower Wall Mixer Cartridge: Kerox 35mm Cartridge Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C Brass; Pin Lever Available colours: Chrome Matt Black Brushed Nickel Gun metal Grey Brushed Gold [SHORTDESCRIPTION] Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$173.00$147.05
Ikon Hali Wall Mixer With Diverter Brushed Gold
Hali Wall Basin Mixer with Diverter Material: Brass Cartridge: Kerox 35mm Cartridge Working Pressure: 150-500 kpa Operating Temperature: 1°C to 70°C European designed; Pin Lever Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold [SHORTDESCRIPTION] Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance. Do not use undue pressure when wiping. Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water. Tapware Aerator cleaning The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product. Warranty: The ACL Warranty Guide can be viewed here Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.
$309.00$262.65
