Tapware

Finish: Chrome Material: SS304 Stainless Steel Pin lever design European Kerox 35mm Cartridge Operating temperature 1°C to 70°C Operating pressure 150~500 kPa 2 Sizes   Available colours: Stainles Steel Chrome Matt Black Gun Metal Grey Brushed Gold   [SHORTDESCRIPTION] Wels Information: Short Mixer6 star, 4.5L/MinWELS Reg Number: T41841   Tall Mixer6 star, 4.5L/MinWELS Reg Number: T41840   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Finish: Chrome Material: SS304 Stainless Steel Pin lever design European Kerox 35mm Cartridge Operating temperature 1°C to 70°C Operating pressure 150~500 kPa   Available colours: Stainles Steel Chrome Matt Black Gun Metal Grey Brushed Gold   [SHORTDESCRIPTION] Wels Information: Short Mixer5 star, 5L/MinWELS Reg Number: T41846   Tall Mixer5 star, 5L/MinWELS Reg Number: T41845   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Finish: Chrome Material: Brass 35mm Cartridge Operating temperature 1°C to 70°C Operating pressure 150~500 kPa Pin Handle   Available colours: Chrome Matt Black   [SHORTDESCRIPTION] Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Finish: Stainless Steel Material: SS304 Stainless Steel Pin lever design European Kerox 35mm Cartridge Operating temperature 1°C to 70°C Operating pressure 150~500 kPa 2 Sizes   Available colours: Stainles Steel Chrome Matt Black Gun Metal Grey Brushed Gold   [SHORTDESCRIPTION] Wels Information: Short Mixer6 star, 4.5L/MinWELS Reg Number: T41841   Tall Mixer6 star, 4.5L/MinWELS Reg Number: T41840   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Finish: Stainless Steel Material: SS304 Stainless Steel Pin lever design European Kerox 35mm Cartridge Operating temperature 1°C to 70°C Operating pressure 150~500 kPa   Available colours: Stainles Steel Chrome Matt Black Gun Metal Grey Brushed Gold   [SHORTDESCRIPTION] Wels Information: Short Mixer5 star, 5L/MinWELS Reg Number: T41846   Tall Mixer5 star, 5L/MinWELS Reg Number: T41845   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

  Features: Set of tap assemblies Made from solid brass Chrome finish Jumper valve Suitable for mains pressure, max. 500kpa [SHORTDESCRIPTION] Cleaning & Care Regularly clean with mild soapy water using a microfibre cloth. In highly polluted or coastal locations, we recommend cleaning 2-3 times per week. Do not use harsh detergents, bleach, cream cleaners or citrus based cleaners. These substances are abrasive and will damage the surface. Do not use undue pressure and wipe in one direction only.   Warranty: Full details of Fienza Warranty Guide can be viewed here   Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices. Please note, these products may have a visible Fienza or Watermark logo.

Read more less

Features: Designed for shower and bath Oval shape design Chrome finish Made from solid brass 35mm cartridge Suitable for mains pressure, max. 500kpa [SHORTDESCRIPTION] Cleaning & Care Regularly clean with mild soapy water using a microfibre cloth. In highly polluted or coastal locations, we recommend cleaning 2-3 times per week. Do not use harsh detergents, bleach, cream cleaners or citrus based cleaners. These substances are abrasive and will damage the surface. Do not use undue pressure and wipe in one direction only.   Warranty: Full details of Fienza Warranty Guide can be viewed here   Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices. Please note, these products may have a visible Fienza or Watermark logo.

Read more less

Features: Designed for shower and bath Oval shape design Chrome finish Made from solid brass 35mm cartridge Suitable for mains pressure, max. 500kpa [SHORTDESCRIPTION] Cleaning & Care Regularly clean with mild soapy water using a microfibre cloth. In highly polluted or coastal locations, we recommend cleaning 2-3 times per week. Do not use harsh detergents, bleach, cream cleaners or citrus based cleaners. These substances are abrasive and will damage the surface. Do not use undue pressure and wipe in one direction only.   Warranty: Full details of Fienza Warranty Guide can be viewed here   Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices. Please note, these products may have a visible Fienza or Watermark logo.

Read more less

    Features: Three-piece bath set Fixed position Made from solid brass Chrome finish Jumper valve Suitable for mains pressure, max. 500kpa [SHORTDESCRIPTION] Wels Information: WELS rating not required   Cleaning & Care Regularly clean with mild soapy water using a microfibre cloth. In highly polluted or coastal locations, we recommend cleaning 2-3 times per week. Do not use harsh detergents, bleach, cream cleaners or citrus based cleaners. These substances are abrasive and will damage the surface. Do not use undue pressure and wipe in one direction only.   Warranty: Full details of Fienza Warranty Guide can be viewed here   Note: The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices. Please note, these products may have a visible Fienza or Watermark logo.

Read more less

Chrome finish Wall mounted, fixed position Includes pre-fitted basin aerator and free-flow bath aerator Made from solid brass Push-fit installation Female 1/2″ BSPP inlet   [SHORTDESCRIPTION] WELS Info: 180mm WELS 5 Star rated, 5L/min when installed over basin WELS Registration: T37566 220mm WELS 5 Star rated, 5L/min when installed over basin WELS Registration: T37567   Cleaning & Care Regularly clean with mild  soapy water using a microfibre cloth. In highly polluted or coastal locations, we recommend cleaning 2-3 times per week. Do not use harsh detergents, bleach, cream cleaners or citrus based cleaners. These substances are abrasive and will damage the surface. Do not use undue pressure and wipe in one direction only.   Warranty: Full details of Fienza Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices. Please note, these products may have a visible Fienza or Watermark logo.

Read more less

Finish: Chrome Working pressure: 150-500kpa Operating temperature:  1°C to 70°C 35mm Cartridge     [SHORTDESCRIPTION] Wels Information: 5 star, 5L/Min WELS Reg Number: T37856   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Finish: Chrome Pin lever design 35mm Cartridge Working pressure: 150-500kpa Operating temperature:  1°C to 70°C   Available colours: Chrome Matt Black   [SHORTDESCRIPTION] Wels Information: 5 star, 5L/Min WELS Reg Number: T37627   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less