Wall Basin Mixers

Hali Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C Pin Lever   Available colours: Chrome Matt Black Brushed Nickel   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T31844   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Hali Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C Pin Lever; Curved Spout   Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T33001   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Hali Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C Pin Lever   Available colours: Chrome Matt Black Brushed Nickel   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T31844   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Hali Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C Pin Lever; Curved Spout   Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T33001   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Hali Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C Pin Lever   Available colours: Chrome Matt Black Brushed Nickel   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T31844   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Hali Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C Pin Lever; Curved Spout   Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T33001   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Flores Wall Basin Mixer Material: Brass Cartridge: Kerox 35mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C   Available colours: Chrome Matt Black Brushed Nickel Brushed Gold   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T38140   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Ceram Wall Basin Mixer Material: Brass Cartridge: Kerox 35mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C   Available colours: Chrome Matt Black Brushed Nickel Brushed Gold   [SHORTDESCRIPTION] Wels Information: 5 star 5.5L/MinWELS Reg Number: T38139   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Kara Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C European designed Curved Tip   Available colours: Chrome Chrome & White Matt Black Brushed Nickel Brushed Gold Matt Black & Rose Gold Handle   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T26647   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Hali Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C Pin Lever; Curved Spout   Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T33001   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Hali Wall Basin Mixer Material: Brass Cartridge: Kerox 25mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C Pin Lever; Curved Spout   Available colours: Chrome Matt Black Brushed Nickel Gun Metal Grey Brushed Gold   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T33001   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less

Seto Wall Basin Mixer Material: Brass Cartridge: Kerox 35mm Cartridge Aerator: Neoperl Concealed  Working Pressure: 150-500  kpa  Operating Temperature: 1°C to 70°C Round Corners   Available colours: Chrome Chrome & White Matt Black Matt Black & Rose Gold Handle   [SHORTDESCRIPTION] Wels Information: 5 star 5L/MinWELS Reg Number: T26656   Care & Maintenance Tapware & Showers & Accessories Under no circumstances should tapware be installed using silicone. Never use harsh detergents, citrus based cleaners or abrasive cleaners, on any products as these will scratch the surface. Where your tapware/showers/accessories remain dry in use, a soft cloth can be used to remove surface dust. Alternatively, a wipe over with warm soapy water is all that is required to maintain the finish in perfect condition for a lifetime of use. Don’t use cleaning products containing chlorides and halides (e.g. Bromine, Iodine and Fluorine). Don’t use disinfectant to clean stainless-steel parts and components. Don’t use hydrochloric acid (HC) for cleaning. This will lead to pitting and stress corrosion cracking (SCC). Use of wax-based furniture Cream should be avoided as these can result in a build-up of deposits, which could detract from the appearance.  Do not use undue pressure when wiping.   Colour-plated products should always be cleaned with care using a soft dry cloth or a soft cloth with warm soapy water.  Tapware Aerator cleaning  The cleaning of the Aerator insert must be performed regularly. The frequency depends on the water quality and water borne debris in your area as it is the homeowner’s responsibility to keep the Aerator insert clean. We suggest this be performed at a minimum of 6-month intervals. Refer to installation instructions supplied with the product.   Warranty: The ACL Warranty Guide can be viewed here   Note:  The colour discrepancy from the actual product colour may incur depending on the monitor resolutions and devices.

Read more less